cm6520 2-9Basic copy operations 2Basic copy operations Chapter 2Scanning the document in separate batches ("Separate Scan" setting)A large document can be divided and scanned in a number of batches.A maximum of 100 document pages can be loaded into the ADF at one time. However, by copying with the"Separate Scan" setting, a document that exceeds 100 pages can be scanned and treated as a single copyjob. In addition, the scanning location can be switched between the original glass and the ADF during thescanning operation.0 The loading capacity of the ADF is 100 sheets of plain paper (21-1/4 lb) or 38 sheets of thick paper (55-3/4 lb).0 The output method used with the "Separate Scan" setting can be set to "Page Print" or "Batch Print".As a default, "Batch Print" is selected.0 For details on the output method used with the "Separate Scan" setting, refer to the description for"Separate Scan Output Method" in "Copier Settings" on page 11-16.1 Position the document to be copied.– For details on positioning the document, refer to "Feeding the document" on page 2-6.2 In the Basic screen, touch [Separate Scan].– To cancel the "Separate Scan" setting, touch [Separate Scan] again to deselect it.
