2 Basic copy operations2-78 cm65202.16 Scanning the next document to be copied while a copy job is beingprinted (next job reservation)The settings for the next copy job can be specified and the document can be scanned while a copy job isbeing printed so that it can be printed once the current copy job is finished.0 Up to 61 copy jobs, including the current copy job, can be reserved.0 A copy job can be reserved after scanning of the loaded document is finished. The next job cannot bereserved while a document is being scanned.0 To delete a reserved copy job, touch [Job List] in the left panel, and then touch [Job Details]. For details,refer to "Deleting a job" on page 10-6.1 When the message "Ready to accept another job." appears while the current job is being printed, adocument can be loaded, and copy settings can be specified for the next copy job.– For details on positioning the document, refer to "Feeding the document" on page 2-6.– If the "Copy Operating Screen" parameter in Utility mode is set to "Yes", touch [Next Copy Job]while printing to display the Basic screen.– For details on specifying the screen that appears while printing, refer to "Custom Display Settings"on page 11-15.2 Press the [Start] key.3 After the current copy job is finished, the next copy job begins.
