11 Utility mode11-86 cm65202 NoteThe number of times for checking for "Prohibited Functions When Authentication Error" can bechanged to a number between 1 and 3.A changed setting cannot be changed when "Enhanced Security Mode" is set to "OFF".When "Password Rules" is set to "Enable", a password that does not meet the password rules isconsidered a failed attempt during authentication. For details on the password rules, refer to "PasswordRules" on page 11-83.For details on the changed network settings, refer to the User’s Guide [Network Scanner Operations].User operation limitationsWhen "Enhanced Security Mode" is set to "ON", an icon appears in the screen and limitations are placed onthe user for the following operations.- A public user cannot use this machine.- The list of users does not appear in the user authentication screen.- When user authentication has failed the specified number of times, the control panel can no longer beoperated. If operation of the control panel is restricted, touch [Release], and then select the itemswhose operation restrictions are canceled.- The destination cannot be changed by the user.- This machine’s counter data cannot be retrieved by Net Care or VISUALCOUNT-MASTER.- An application performing the write operation with SNMP v1/v2c cannot be connected.- Write users using SNMP v3 must be authenticated.2 NoteFor details on the limitations placed on the user for box operations, refer to the User’s Guide [BoxOperations].For details on the limitations placed on the user for printing, refer to the User’s Guide [Print Operations].For details on canceling operation restrictions applied when authentication failed, refer to "SecuritySettings" on page 11-29.Security Settings—Security Details—Confidential Docu-ment Access MethodSet to "Mode 2".Security Settings—HDD Setting—Overwrite TemporaryDataSet to "Mode 1".Administrator mode parameters Changed settings
