6 Copy paper/original documents6-16 cm65202 Touch the button for tray 1.– To specify a setting for special paper for tray 1, tray 2 or tray 3 or the bypass tray, touch the buttonfor the corresponding paper tray.– If a setting for special paper is selected for a paper tray, that tray is not selected automatically withthe "Auto" Paper setting. However, if the paper cannot be used for double-sided printing and the"Single Side Only" setting is selected for the paper tray, that tray is given priority.– The auto tray switch feature applies only to paper trays specified with the same paper type setting.3 Touch [Change Tray Settings].4 Select the appropriate setting for the type of special paper that is loaded.– Touch the button for the desired paper type.? What types of paper can be loaded in the paper tray?% There are limits on the types of paper that can be loaded in a paper tray. For details on the type ofpaper that can loaded, refer to "Specifications" on page 5-2.% If postcards were loaded, select "Thick 3".5 Touch [OK], and then touch [OK] in the next screen that appears.The Basic screen appears again.2 ReminderIf special paper is loaded into the paper tray, be sure to select the corresponding paper type, otherwisea paper misfeed may occur.!DetailFor details on loading the paper into tray 3, refer to "Loading paper into tray 3" on page 1-40.For details on loading the paper into tray 4, refer to "Loading paper into tray 4" on page 1-41.
