Panasonic EYFR03 User Manual

Also see for EYFR03: Training guide

EYFR03 User Manual 23 of 110 v1.6.0Chapter 3: Configuring the unit 20 January 20206 TON6 TOO5 TOOJ5 TOOK5 TOOLright arrow TOOL_right arrow TOOL _1 TOOL 1(Since neither 1 nor 0 have associated letters, pressing them will only enter the number.)Once you have entered the desired name, press Save or ENT. This does not permanently savethe value just entered. You must also save from the screen that sent you to the letter screen. Ifyou no longer want to change the value, press Cancel or ESC. At this point, the unit will returnto the previous screen without changing the value.Main MenuFigure 15: Main MenuThe EYFR03 menu provides the entry point to configure and control the unit. You must enterthe box password before entering the menu from the Run screen. If you cannot remember thepassword, you may reset it to the factory default (1011) by entering the sequence “6853.48” onthe Run screen. Use the arrow keys to navigate to the desired entry and press ENT to go to theentry’s screen. To exit the menu, press ESC or navigate to Lock & Exit or Exit and press ENT.Pressing ESC or Lock & Exit will “lock” the menu and return to the Run screen, requiring thepassword to be reentered before the menu can be accessed again. Pressing Exit will return to theRun screen without locking the unit, allowing the menu to be reentered without entering thepassword.