Panasonic EYFR03 User Manual

Also see for EYFR03: Training guide

EYFR03 User Manual 82 of 110 v1.6.0Chapter 7: EtherNet/IPTM 20 January 2020Assembly Object Connection PointsThis section defines the assembly object connection points provided by the EYFR03 productline. As per the EtherNet/IPTM specification for the Assembly Object, instance number andconnection point are equivalent. This document will refer to them as connection pointthroughout.Output (O->T) Connection PointsThe following connection points are used by the EYFR03 to take input data from the network.These connection points allow you to control the running operation of the qualifier. Othersetting parameters may be configured through the vendor-specific objects.160 Name Data Type DescriptionItem Number UINT Instance number of items to run. Deactivate any running parameter,job, or group if 0.Item Type USINT Type of item to run:0 - Parameter1 – Group2 – JobIgnored if Item Number is 0.Batch Reset USINT When this value changes, the batch counts of the currently runningparameter or group is reset.Suspend BOOL When set, suspends the unit without stopping a running parameter,group, or job.VIN SHORT_STRING Max length 100Total size: 6-106 bytes161 Name Data Type DescriptionItem Number UINT Instance number of items to run. Deactivate any running parameter,job, or group if 0.Item Type USINT Type of item to run:0 - Parameter1 – Group2 – JobIgnored if Item Number is 0.Batch Reset USINT When this value changes, the batch counts of the currently runningparameter or group is reset.Suspend BOOL When set, suspends the unit without stopping a running parameter,group, or job.Reserved USINT Padding byte for devices requiring even connection point sizes.Total size: 5-6 bytes162 Name Data Type DescriptionItem Number UINT Instance number of items to run. Deactivate any running parameter,job, or group if 0.Item Type USINT Type of item to run:0 - Parameter1 – Group