Panasonic EYFR03 User Manual

Also see for EYFR03: Training guide

EYFR03 User Manual 28 of 110 v1.6.0Chapter 3: Configuring the unit 20 January 2020Configuration OptionsFigure 24: Parameter Edit screen –OK/NOKFigure 25: Parameter Edit screen –AccuPulseFigure 26: Parameter Edit screen -InputSoft keys1. Delete – Deletes all information in the parameter and returns to the Choose Parameter screen.This button is not available for parameters 1-16.2. No function3. Save – Saves changes to the parameter and returns to the Choose Parameter screen4. Cancel [ESC] – Discards changes to the parameter and returns to the Choose ParameterscreenCommon FieldsNameThe parameter name can be up to 25 numbers, letters, or decimal points.The parameter name is shown on screen when running the parameter and reported to the networkwith tightenings performed in the parameter.ToolThis setting controls which tool is used by this parameter. You must select a learned tool beforea parameter can be used. Parameters 1-16 always use the tool of the same number. (Parameter 1uses tool 1, parameter 2 uses tool 2, etc.). Parameters 17-100 may be assigned to use any desiredtool. Multiple parameters may use the same tool.If the tool used by a parameter is forgotten, the parameter will become invalid.BatchDefault: 1Range: 1 to 255This setting determines how many good tightenings must be performed in the parameter tocomplete a batch.Lock on batchDefault: No