Panasonic EYFR03 User Manual

Also see for EYFR03: Training guide

EYFR03 User Manual 32 of 110 v1.6.0Chapter 3: Configuring the unit 20 January 2020Configuration OptionsFigure 29: Group Edit screenSoft keys1. Delete – Deletes all information in the group and returns to the Choose Group screen.2. Parameters – Goes to the Group Parameter Select screen3. Save – Saves changes to the group and returns to the Choose Group screen4. Cancel [ESC] – Discards changes to the group and returns to the Choose Group screenNameThe group name can be up to 25 numbers, letters, or decimal points.The group name is shown on screen when running the group but is not sent to the network.Lock on doneDefault: NoThis setting determines if the unit will lock or restart the group when the group is completed.When set to Yes, the qualifier will not restart the group when all parameter batches arecompleted and will require a batch reset or parameter selection command to restart the group.When set to No, the qualifier will restart the group when it completes.This setting is ignored when running the group as part of a job.Batch beep onDefault: GroupValues: Group, ParameterThis setting determines if the unit will sound the batch beep for each parameter in the group oronly when the entire group is completed. The UI will show the batch color for each individualparameter when it completes regardless of this setting.Free run modeDefault: NoThis setting determines if the group runs in standard or free run mode. When set to No, thegroup will run in standard mode. When set to Yes, the group will run in free run mode.