Panasonic EYFR03 User Manual
Also see for EYFR03: Training guide
                                                                                                              |
EYFR03 User Manual 25 of 110 v1.6.0Chapter 3: Configuring the unit 20 January 2020Tool ConfigurationFigure 20: Tool Configuration screen Figure 21: Tool Configuration screen – Input toolsSoft keys1. Forget – Removes the tool from the unit.2. No function3. Save – Saves changes made to the tool configuration.4. Cancel [ESC] – Cancels changes made to the tool configuration.NameThe tool name can be up to 25 numbers, letters, or decimal points.The tool name is shown on screen when running a parameter that uses the tool but is not reportedto the network.Radio InfoThe radio info shows the radio address and the firmware version used by the radio tocommunicate with the qualifier. The device has additional firmware to run the tool, but noinformation about this firmware is reported. Some features require a minimum radio version andtool firmware version.RadioVersionFeatures new in the version4.33 • Two-way functions3.19 • Improved result buffering3.17 • Tool enable/disable/antitheft.This field cannot be edited.Serial NumberThe tool serial number can be up to 14 numbers, letters, or decimal points.The tool serial number is reported to the network with tightenings performed by the tool but isnot shown anywhere on screen besides this menu.Last CalibrationThis field is used to store the date when the tool was last calibrated. The display order of thisfield is: |
Related manuals for Panasonic EYFR03
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine