Panasonic EYFR03 User Manual

Also see for EYFR03: Training guide

EYFR03 User Manual 42 of 110 v1.6.0Chapter 3: Configuring the unit 20 January 2020Enter new PasswordFigure 41: Enter new Password screenSoft keys1. Remove – Clears the unit password and returns to the Qualifier Settings screen.2. No function3. Save [ENT] – Keeps changes to the password and returns to the Qualifier Settings screen.4. Cancel [ESC] – Cancels changes made to the password and returns to the Qualifier Settingsscreen.The Enter new password screen allows you to change the password to a string of up to 10 digits.Note that the password entered on this screen will be shown in clear text as it is typed. Enter thenew password by typing the desired series of digits and pressing Save or ENT. The newpassword will not be saved to permanent memory until saving from the qualifier settings screen.If you decide not to change the password, press Cancel or ESC.You may completely remove the password from the unit by pressing Remove. Removing thepassword will allow unrestricted access to all functions of the unit until a new password isentered. If you only want to temporarily disable the password, use the Exit button on the MainMenu screen as described to return to the Run screen.XBEE Channel NoiseThe XBEE Channel Noise screen will test each of the available channels to determine how muchnoise is already on those channels. The channel with the lowest amount of noise will beindicated by a blue bar.Figure 42: XBEE Channel Noise screen