Panasonic EYFR03 User Manual

Also see for EYFR03: Training guide

EYFR03 User Manual 46 of 110 v1.6.0Chapter 3: Configuring the unit 20 January 2020The Events screen shows the log of non-tightening events that have occurred. More informationis available via the PC software application. This screen shows:• Time – The time the event occurred. The date is indicated at the top of the table and eachtime it changes. The current time is shown at the bottom of the screen for comparison.• Code – The event code for this event.• Event – The name of this event.• Source – The source that caused the event.• Status – The status of the event. 0 indicates success, non-zero indicates an error.Network LogFigure 49: Main menu – Logs Figure 50: Logs Menu screen –NetworkFigure 51: Network Log screenFunction keys1. No function2. Previous – Go to the previous page of more recent network events. When on the first page,this key will be blank.3. Next [ENT] – Go to the next page of older network events. When on the last page, this keywill be blank.4. Return [ESC] – Returns to the Run Screen.The Network Log screen shows the log of network events that have occurred since the qualifierstarted up. This log is not maintained across reboots or power cycles. This screen shows:• Time – The time the event occurred. The date is indicated at the top of the table and eachtime it changes. The current time is shown at the bottom of the screen for comparison.• Source – The remote IP address for this event.• Packet – Information about the packet sent or received or network connection start/stop.