Panasonic EYFR03 User Manual

Also see for EYFR03: Training guide

EYFR03 User Manual 91 of 110 v1.6.0Chapter 7: EtherNet/IPTM 20 January 2020EE Time CHAR[6] ASCII digits of time of last EEPROM write in HHMMSS format.EE Date CHAR[6] ASCII digits of date of last EEPROM write in MMDDYY format.Torque CHAR[6] ASCII digits and decimal point (‘.’) representing the value. Not used bythe EYFR03.Min Torque CHAR[6] ASCII digits and decimal point (‘.’) representing the value. Not used bythe EYFR03.Max Torque CHAR[6] ASCII digits and decimal point (‘.’) representing the value. Not used bythe EYFR03.Units USINT Character representing the units of the torque. Not used by the EYFR03.Angle CHAR[5] ASCII digits representing the value. Not used by the EYFR03.Min Angle CHAR[5] ASCII digits representing the value. Not used by the EYFR03.Max Angle CHAR[5] ASCII digits representing the value. Not used by the EYFR03.Tool Type 1 CHAR[3] Type of tool in parameter 1. See Tool Type for values.Tool Type 2 CHAR[3] Type of tool in parameter 2. See Tool Type for values.Tool Type 3 CHAR[3] Type of tool in parameter 3. See Tool Type for values.Tool Type 4 CHAR[3] Type of tool in parameter 4. See Tool Type for values.Tool Type 5 CHAR[3] Type of tool in parameter 5. See Tool Type for values.Tool Type 6 CHAR[3] Type of tool in parameter 6. See Tool Type for values.Tool Type 7 CHAR[3] Type of tool in parameter 7. See Tool Type for values.Tool Type 8 CHAR[3] Type of tool in parameter 8. See Tool Type for values.Total size: 102 bytes101This connection point corresponds to the mask 1 of the EIP network card for the EYFR01.Name Data Type DescriptionParameter CHAR ‘A’-‘H’Tightening Status CHAR Status of the last tightening. One of:‘O’ – Good tightening‘N’ – Bad tightening or no tightening performed since the last parameterchange.Tightening Type CHAR Type of the last tightening. One of:‘B’ – Good tightening that finished a batch‘C’ – Good tightening that did not finish a batch‘R’ – Bad tightening‘N’ – No tightening performed since the last parameter changeCount USINT The count of the last tightening.Batch USINT The batch size of the last tighteningRolling Count UINT Number of tightenings that have occurred.Total UINT Number of batches completed in the parameter.Reserved USINTTotal size: 10 bytes102This connection point corresponds to the mask 2 of the EIP network card for the EYFR01.Name Data Type DescriptionTightening status CHAR Status of the last tightening. One of:‘O’ – Good tightening‘N’ – Bad tightening or no tightening performed since the last parameterchange.Rolling Count UINT Number of tightenings that have occurred.Reserved USINT