Panasonic EYFR03 User Manual

Also see for EYFR03: Training guide

EYFR03 User Manual 39 of 110 v1.6.0Chapter 3: Configuring the unit 20 January 2020Reject timeoutDefault: 2 secondsRange: 0 to 10 secondsThis setting controls how long the on-screen indication of a rejected tightening will be shown.When set to 0, the indication will remain until another tightening is received for the parameter orthe qualifier changes or stops the currently running operation. Partial seconds may be entered forthis setting.Rejects are indicated by shading the screen red behind the parameter that received the reject.Batch timeoutDefault: 2 secondsRange: 0 to 10 secondsThis setting controls how long the on-screen indication of a tightening that completes a batchwill be shown. When set to 0, the indication will remain until another tightening is received forthe parameter or the qualifier changes or stops the currently running operation. Partial secondsmay be entered for this setting.Batch completions are indicated by shading the screen blue or yellow behind the parameter thatreceived the result to complete a batch.Cycle timeoutDefault: 2 secondsRange: 0 to 10 secondsThis setting controls how long the on-screen indication of an accepted tightening that was not thelast in a batch will be shown. When set to 0, the indication will remain until another tighteningis received for the parameter or the qualifier changes or stops the currently running operation.Partial seconds may be entered for this setting.Cycles are indicated by shading the screen green behind the parameter that received the cycle.TimeThis row allows you to set the current time used by the unit. The display order of this field is:year-month-day hour:minute:secondEach piece of the time may be edited by using the left and right arrows to select the variouspieces of the time and the number keys to set the new value.Page 2Bar code baud rateDefault: 9600Values: 9600, 19200, 38400, 57600, 115200