Panasonic EYFR03 User Manual

Also see for EYFR03: Training guide

EYFR03 User Manual 45 of 110 v1.6.0Chapter 3: Configuring the unit 20 January 2020Channel ChangeWhen you change the XBEE channel from the Qualifier Settings screen, the unit will go to theChannel Change screen to update the learned tools with the new channel setting.Figure 44: Channel Change screen Figure 45: Channel Change, tool 1 completeTools will need to be cycled to perform the channel change. Once all tools have been updated,the unit will return to the main menu. If you cannot perform the update on all learned tools atthis time, you may press Skip to skip the tool. This will allow the unit to finish the channelchange, but will leave any skipped tools on the previous channel. When you want to use thetools that were not updated, they must be updated to the correct channel by pulling the batteryand replacing it in the tool. Make sure no other units are in learn mode when you do this, or thetool may learn to the other unit instead. The tool should reconnect to the unit on the new channeland return to normal function.EventsFigure 46: Main menu – Logs Figure 47: Logs Menu screen –NetworkFigure 48: Network Log screenSoft keys1. No function2. Previous – Go to the previous page of more recent events. When on the first page, this keywill be blank.3. Next [ENT] – Go to the next page of older events. When on the last page, this key will beblank.4. Exit [ESC] – Returns to the Run screen.