Technical InformationENGLISH - 101 AppendixTechnical InformationAdjusting screens of multiple screen images[Edge blending] and [Color matching] allow images from multiple projectors to be overlapped seamlessly.■■ [Edge blending]1) Check that the settings of [Screen] and [Image adjust] of each projector are thesame.2) Project images from each projector that you want to overlap.■z The following is an example of how to overlap images from projector A and B.6FUHHQ,PDJH$3URMHFWRU$ 3URMHFWRU%,PDJH%3) Select [Edge blending] in the [Setting] menu and display the setting screen.4) Select [Edge blending] to turn it [On], and then press [Start] and [Width] to adjustthe overlapping position and the amount of overlap (blending width) of images fromprojectors A and B respectively.■z The following values are an example.■z Set [Width] to the same value for all projectors to be overlapped.Projector A: Set [Right] in [Width] to 100Line (red): Moves with the[Width] value Frame (green): Projected imageOverlapping areas(shown with shadow)Frame (green): Projected imageProjector B: Set [Left] in [Width] to 100ExitEdge blending OnOnAllLeftRightTopBottomBlack levelTest patternMenu offStartWidthStartWidthStartWidthStartWidthAllReset BackNextMoveBackExitEdge blending OnOnAllLeftRightTopBottomBlack levelTest patternMenu offStartWidthStartWidthStartWidthStartWidthAllReset BackNextMoveBack5) Where required, adjust the focus and zoom for the image position from eachprojector.
