Specifications114 - ENGLISHAppendixSpecificationsThe following table describes the specifications of the projector.Model No. PT-EX12KE/PT-EX12KUPower supply AC 100 V - 240 V 50 Hz/60 HzPower consumption 100 V - 240 V 10.3 A 940 WStandby: 17 WLCD panelSize 4.57 cm (1.8") (aspect ratio 4:3)Display system Three transparent LCD panels (RGB)Drive system Polysilicon TFT active matrix systemNumber ofpixels 786 432 pixels (1 024 x 768 dots) x 3 panelsLuminous lamp 380 W NSHA UHM lamp x 2Light output13 000 lmUsage conditions [Lamp select]: [2-Lamps][Lamp power]: auto or standard[Image select]: [Dynamic][Advanced color]: [Auto]Lens Model No.: ET-ELS03Image signals that can be projected Refer to “List of compatible signals” ( page 111).Color system Six standards (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/SECAM)Screen size 1.02 m (40") – 15.24 m (600")Screen aspect ratio 4:3Projection method Refer to “Projection method” ( page 34).Contrast ratio4 000:1Usage conditions [Lamp select]: [2-Lamps][Lamp power]: auto[Image select]: [Dynamic][Advanced color]: [Auto]TerminalsINPUT 1DVI-D inputterminal1 set, DVI-D 24 p (HDCP compliant)Digital signal TMDS (Transition Minimized Differential Signaling)HDMI inputterminal 1 set, HDMI 19 pin (HDCP, Deep color compliant)Computer inputterminal1 set (D-Sub 15 p (female))RGB signal 0.7 V [p-p] 75 Ω (G-SYNC: 1.0 V [p-p] 75 Ω)HD/SYNC TTL high impedance, automatic positive/negativepolarity compatibleVD, TTL high impedance, automatic positive/negative polaritycompatibleINPUT 2RGB 5BNCinput terminal1 set (BNC 5 p)RGB signal 0.7 V [p-p] 75 Ω (G-SYNC: 1.0 V [p-p] 75 Ω)HD/SYNC TTL high impedance, automatic positive/negativepolarity compatibleVIDEO signal 1.0 V [p-p] 75 Ω negative syncY PB/CB PR /CR signal Y: 1.0 V [p-p] negative sync, P B/CB: 0.7 V [p-p] 75 Ω, PR/CR: 0.7V [p-p] 75 ΩS-VIDEO inputterminal 1 set, Mini DIN 4 p Y 1.0 V [p-p], C 0.286 V [p-p] 75 Ω S1 signal compliantSerial input/outputterminal D-Sub 9 p 1 set, RS-232C-compatible computer controlUSB terminal (used byservice personnel) USB connector (1 set, series B)Wired remote controlterminal Mini jackLAN terminal 1 set, RJ-45 for network connection, PJLink compliant, 10Base-T/100Base-TX