Panasonic PT-EX12KU Operating Instructions Manual

Also see for PT-EX12KE: Operating instructions

Contents

Technical Information102 - ENGLISHAppendix6) Then use [Lens shift] to overlap the shaded areas.■z The red line will turn yellow if it is overlapped correctly.Line (yellow) Frame (green): Projected imageExitEdge blending OnOnAllLeftRightTopBottomBlack levelTest patternMenu offStartWidthStartWidthStartWidthStartWidthAllReset BackNextMoveBack ExitEdge blending OnOnAllLeftRightTopBottomBlack levelTest patternMenu offStartWidthStartWidthStartWidthStartWidthAllReset BackNextMoveBack7) Turn [Test pattern] to [On] to display a 50% white test pattern.■z The overlapping areas will be displayed more brightly than other areas.8) Adjust [Black level] so that there is no difference between the overlapping areas andother areas.■z To adjust the overlapping areas, setting a smaller value to the [Contrast] in the [Image adjust] menu isrecommended.If the left and right colors do not match, proceed to the following step.■■ [Color matching]9) Select [Color matching] in the [Setting] menu and display the setting screen.10) Turn on color matching with [On] and adjust [Red]/[Green]/[Blue]/[White].11) Select [Advanced color matching] if more detailed settings are required, and displaythe setting screen.12) Turn on advanced color matching with [On] and adjust each color with [Target].■z Set the [Target] value to within the [Measured] value range.$GYDQFHGFRORUPDWFKLQJ0HDVXUHG7DUJHW$XWRWHVWSDWWHUQ0HQXRII)DFWRU\GHIDXOW7HVWSDWWHUQ6WRUH 5HVHW %DFN,QIRUPDWLRQ2II5HG*UHHQ%OXH5HG*UHHQ%OXH&\DQ0DJHQWD:KLWH([LW %DFN 1H[W0RYH2Q Example) Value for “[Red], x”“[Measured] = 0.674”, so [Target] is set to a smaller valueof “0.650”.13) If the colors do not match even after adjusting [Target], use a colorimeter tomeasure the chromaticity coordinates and luminance to make further adjustments.