[Input] menuENGLISH - 55 Settings[System][System] is displayed below the sub menu.1) Press ▲▼ to select [System] belowthe sub menu and press the button.■z The sub menu 2 is displayed.2) Press ▲▼ to select an item and pressthe button.■z Press ◀ to return to the sub menu.■■ For computer input[Auto]When there is no input signalcompatible with the signal froma connected computer on theprojector, the automatic PCadjustment function works and[Auto] is displayed on the system.If images are not being correctlyprojected, manually adjust thesettings to suit your computer andregister in [Store].—There is no input signal from thecomputer.Check the connections.[Mode 1] -[Mode 10]Displays the mode registered with[Store] in [PC adjust].■■ For video and S-video input[Auto] The projector automatically selectsthe color system of the input signal.[PAL]/[SECAM]/[NTSC]/[NTSC4.43]/[PAL-M]/[PAL-N]This is a list of supported colorsystems. The Japanese colorsystem is NTSC. When the qualityof the input signal is poor (irregularcolor, absence of color etc.), andthe color system is not selectedeven when [Auto] is set, select[NTSC].■■ For component input[Auto]The projector automatically selectsthe scanning method of the inputsignal.Componentvideoscanningmethods([480p],[576p], [720p],[480i], [576i],[1035i], [1080i],[1080p])When video is not being playedback correctly, select the correctscanning method from the menu.
