[Image adjust] menuENGLISH - 63 Settings[Advanced color]Sets the operation of the color control device thatindependently controls the quantity of yellow light.1) Press ▲▼ to select [Advanced color].2) Press the button.3) Press ◀▶ to switch the setting.■z The setting will change as follows each timeyou press the button.[Off] [Auto]■z The white balance may change depending onthe image.[Sharpness]1) Press ▲▼ to select [Sharpness].2) Press the button.■z The adjustment screen is displayed.3) While looking at the screen, press ◀▶to adjust the setting.Operation Adjustment RangePress ▶ . The sharpnessincreases. 0 - +31Press ◀ . The sharpnessdecreases.[Gamma]1) Press ▲▼ to select [Gamma].2) Press the button.■z The adjustment screen is displayed.3) While looking at the screen, press ◀▶to adjust the setting.Operation Adjustment RangePress ▶ .Brightens theintermediategradations. 0 - +15Press ◀ .Darkens theintermediategradations.[Noise reduction]Reduces noise when viewing old video or otherimages affected by noise.1) Press ▲▼ to select [Noise reduction].2) Press the button.3) Press ◀▶ to switch the setting.■z The setting will change as follows each timeyou press the button.[Off] [On][Progressive]Can be set for video input signals of 480i, 576i, 1035i,and 1080i.1) Press ▲▼ to select [Progressive].2) Press the button.3) Press ◀▶ to switch the setting.■z The setting will change as follows each timeyou press the button.[Off] [On] [Film]■z Set to [Off] when video with a lot of movementis affected by flickers or horizontal lines.■z [Film] enables playback of 3-2 pull down/2-2pull down images on the projector without lossof picture quality in the images.■z When switching, the image will distort for amoment.