[Screen] menu68 - ENGLISHSettings■■ [Corner pattern]Selects the corner pattern mode displayed duringcorner correction.1) Select [Corner pattern], and press the button.2) Press ▲▼ to select.[Red] Displays the corner pattern in red.[White] Displays the corner pattern in white.[Blue] Displays the corner pattern in blue.[Off] Clears display of corner pattern.■■ [Store]Stores the correction state.1) Select [Store], and press the button.2) Press ▲▼ to select an item, and pressthe button.[Store]The adjustment state remains inmemory even after removing thepower cord.[Reset] The adjustment state is reset whenthe power cord is removed.■z You can register only one of [Standard] and[Corner correction].[Ceiling]Sets the projection method in accordance with theinstallation status of the projector.If the screen display is upside down, select [On].■z This setting is used when the projector isinstalled using the ceiling mount bracket (optionalaccessory).1) Press ▲▼ to select [Ceiling].2) Press the button.3) Press ▲▼ to select.[Off] [On][Rear]Sets the projection method in accordance with theinstallation status of the projector.If the screen display has flipped, select [On].1) Press ▲▼ to select [Rear].2) Press the button.3) Press ▲▼ to select.[Off] [On][Reset]The setting returns to its value before adjustment.1) Press ▲▼ to select [Reset].2) Press the button.3) Select [Yes], and press the button.■z The setting returns to its value beforeadjustment.■z Select [No] and press the button toreturn to the sub menu.