|
Using the remote controlENGLISH - 49 Basic OperationAdjusting picture qualityPressing the button on the remotecontrol displays the [Image adjust] menu.button1) Press the button onthe remote control.2) Press ▲▼ to select an item, and pressthe button.■z The adjustment menu is displayed.3) Press ▲▼ to select the item to adjust,and then press ◀▶ to change thesetting.Note■z For details, refer to “[Image adjust] menu”( page 60).Screen buttonYou can change the setting of the [Screen] menu.buttonPressing the button on the remote controldisplays the currently selected [Screen] menu, theneach subsequent press of the button changes themode.For computer input For video input[Normal] [Normal][Full] [Full][Wide(16:9)] [Wide(16:9)][Zoom] [Zoom][True] [Custom][Custom]Note■z For details, refer to “[Screen] menu” ( page 65).■z If you press and hold the button for at least fiveseconds, the settings of the [Screen] menu willreturn to the factory default settings.Displaying a timer forpresentationsWhen you press the button on theremote control, the projector displays either a countof the time elapsed from the press of the button or acountdown.Pressing the button again stops the countand displays the elapsed time up to that point.Pressing the button again restarts thecount.buttonNote■z For details, refer to [P-timer] ( page 83).■z Pressing the button for at least three secondsresets the time. The count-up is returned to “000:00”and the countdown is returned to the time set onthe timer.Checking the settingsYou can check the status of signals and the lamp onthe screen during projection.buttonPressing the button on the remote controldisplays the first page of the information.Pressing the button again displays thesecond page of the information.Pressing the button closes the information.Note■z For details, refer to “[Information] menu” ( page 85).■z To move from the information to another menu,press ▲▼ .■z There is also the button on thecontrol panel. PreviousNext |