Panasonic PT-EX12KU Operating Instructions Manual

Also see for PT-EX12KE: Operating instructions

Contents

[Input] menu54 - ENGLISHSettingsSelect [Input] from the main menu on the menuscreen, and select the item from the sub menu.For operation of the menu screen, refer to“Navigating through menu” ( page 50).■z After selecting the item, press ▲▼◀▶ to makethe setting.Control panelRemote control[Input 1]1) Press ▲▼ to select [Input 1].2) Press ▶ .■z The sub menu 2 is displayed.3) Press ▲▼ to select an item, and pressthe button.[RGB(PCanalog)]Select when inputting an analogsignal from a computer to the terminal.[RGB(Scart)]Select when inputting SCARTsignal to the terminal.[RGB(PCdigital)]Select when inputting a digitalsignal from a computer to the terminal.[RGB(AVHDCP)]Select when inputting an HDCP-compatible digital signal to the terminal.[HDMI]Select when inputting an HDMI-compatible digital signal to the terminal.Note■z The SCART21 pin terminal is a video outputterminal provided in video players sold mainly inEurope. To view RGB output from this terminal onthe projector, connect the SCART21 pin terminalof the video player to the terminalof the projector using a dedicated cable. The RGBSCART signals to be played via the terminal are limited to 480i and 576i RGB signals.Composite video signals cannot be played back.[Input 2]1) Press ▲▼ to select [Input 2].2) Press ▶ .■z The sub menu 2 is displayed.3) Press ▲▼ to select an item, and pressthe button.[RGB]Select when inputting an analogsignal from a computer to the terminal.[Y, Pb/Cb, Pr/Cr]Select when inputting a componentvideo signal to the IN> terminal.[Video]Select when inputting a compositevideo signal to the

terminal.[S-video]Select when inputting an S-videosignal to the terminal.Note■z While some RGB signals are automaticallyrecognized, unrecognized RGB signals aredetected as “Y,Pb/Cb,Pr/Cr” and it is necessary toselect [RGB] from the menu.[Input] menu