| 
[Setting] menu84 - ENGLISHSettings■■ [Restart]Restarts the count-up or countdown that waspaused using [Stop].1) Select [Restart], and press the button.■z The menu screen is cleared and the timer isdisplayed.■■ [Reset]Resets the counted time during operation.1) Select [Reset], and press the button.■z The count-up is returned to “000:00” and thecountdown is returned to the time set on thetimer.■■ [Exit]Exits the presentation timer during operation.1) Select [Exit], and press the button.■z The timer ends, and the screen display returnsto the sub menu.Note■z You can also use [P-timer] by pressing the button on the remote control.[Test pattern]1) Press ▲▼ to select [Test pattern].2) Press the button.■z The sub menu 2 is displayed.3) Press ▲▼ to select an item and pressthe button.■z The test pattern and the test pattern name aredisplayed.■z While the test pattern name is displayed, press▲▼ to go backwards and forwards betweentest patterns.[Color]Displays the testpattern.[Gradation 1], [Gradation 2],[Gradation 3], [Gradation 4][All white][All black][Cross]Note■z While the test pattern is displayed, press the button or the to the menu screen.■z Even while the test pattern is displayed, the zoom,focus, lens shift, shutter, and power off functionstake priority.■z When the zoom, focus, or lens shift operation hasfinished, the projector returns to the test pattern.[Factory default]Returns settings other than the following to the factorydefault settings.■z [Logo PIN code lock]■z [PIN code lock]■z [Filter counter] (All items)■z The logo registered using the “Logo TransferSoftware”1) Press ▲▼ to select [Factory default].2) Press the button.■z A screen for confirming whether to restore thedefault setting is displayed.3) Select [Yes], and press the button.■z The confirmation screen is displayed.4) Select [Yes], and press the button.Note■z When you initialize the settings, all settings youhave made are lost, and settings are restored tothe factory default settings. |
