[PC adjust] menuENGLISH - 57 Settings[Position V]Adjusts the vertical position of the screen.1) Press ▲▼ to select [Position V].2) Press the button.■z The adjustment screen is displayed.3) While looking at the screen, press ◀▶to adjust the setting.■z Press the button to return to the submenu.[Current mode]Displays the current values of H-sync frequencyand V-sync frequency for the currently connectedcomputer.1) Press ▲▼ to select [Current mode].2) Press the button.■z The sub menu 2 is displayed.■z Press ◀ to return to the sub menu.[Clamp]Adjusts the clamp position.Use this when a black line is visible in the projectedimage.1) Press ▲▼ to select [Clamp].2) Press the button.■z The adjustment screen is displayed.3) While looking at the screen, press ◀▶to adjust the setting.■z Press the button to return to the submenu.[Display area H]Adjusts the horizontal resolution.1) Press ▲▼ to select [Display area H].2) Press the button.■z The adjustment screen is displayed.3) While looking at the screen, press ◀▶to adjust the setting.■z Press the button to return to the submenu.Note■z You cannot adjust [Display area H] when any of[480p], [576p], [720p], [480i], [576i], [1035i], [1080i],or [1080p] have been selected using [System] inthe [Input] menu.[Display area V]Adjusts vertical resolution.1) Press ▲▼ to select [Display area V].2) Press the button.■z The adjustment screen is displayed.3) While looking at the screen, press ◀▶to adjust the setting.■z Press the button to return to the submenu.Note■z You cannot adjust [Display area V] when any of[480p], [576p], [720p], [480i], [576i], [1035i], [1080i],or [1080p] have been selected using [System] inthe [Input] menu.