[Setting] menuENGLISH - 71 Settings[Lamp interval]Sets the replacement cycle when [Lamp select] is setto [1-Lamp]. After the replacement cycle, the lamp foruse is automatically changed.■z The set time here is a guideline time.1) Press ▲▼ to select [Lamp interval].2) Press the button.3) Press ▲▼ to switch the setting.[Off] Does not change lamps.[12 H]/[24 H]/[200 H]/[500 H]/[1000 H]/[2000 H]Changes lamps in the set intervals.■z When the set time is reached,the projector lights a lamp, givingpriority to the lamp with theshortest total usage time.[Edge blending]Makes it less easy to see the join between screenswhen multiple screens are used.1) Press ▲▼ to select [Edge blending].2) Press the button.■z Displays [Edge blending] setting screen.3) Press ▲▼ to select [Edge blending].4) Press the button.5) Press ▲▼ to select [On].■z When not performing [Edge blending], select[Off]. Items other than [Back] will be grayed outand cannot be selected.6) Press the button.■z The panel edge is displayed in green, changingto red when the setting value for the edgeblending width is 1 or larger.Note■z Even when the [Edge blending] setting screen isdisplayed, if you press the button, the button, the button,or the button, the setting screen iscleared and the selected function is given priority.On completion of the function, the projector returnsto the setting screen.■z The join between screens may stand out withcertain types of image. Reducing the value of[Contrast] in the [Image adjust] menu may makethe join look more natural.■■ To adjust the blending startposition and blending width1) Press ▲▼ to select the location([Start]/[Width] of [Left]/[Right]/[Top]/[Bottom]) to be corrected.[Start]Sets the blending start position.■z The frame (green) moves as youchange the numerical value.[Width]Adjusts the blending width.■z The red line moves as youchange the numerical value.2) Press the button.3) Press ▲▼ to change the value, andpress ◀▶ to move between digits.■z The numerical values can also be entered usingthe number (<0> - <9>) buttons of the remotecontrol.■z Press the button to end the editmode.Note■z [Left] and [Right] adjustable value: 0 - 512■z [Top] and [Bottom] adjustable value: 0 - 384
