[Information] menuENGLISH - 85 Settings[Information] menuSelect [Information] from the main menu on themenu screen.For operation of the menu screen, refer to“Navigating through menu” ( page 50).■z Press ◀▶ to switch the items.Control panelRemote control■z You can also display sub menus using the button on the remote control.Confirming the settings andusage stateDisplays state of signals during projection, and currentsettings.■■ [Input]Displays type of inputs and signals duringprojection.■■ [System]Displays the status of the input signal duringprojection.■■ [H-sync freq.]Displays H-sync frequency.■■ [V-sync freq.]Displays V-sync frequency.■■ [Screen]Displays the setting status of [Screen].■■ [Lamp select]Displays the current [Lamp select] setting status.■■ [Lamp power]Displays the current [Lamp power] setting status.■■ [Lamp interval]Displays the setting value of the automaticreplacement cycle of the lamp which is beingused.■■ [Lamp 1]Displays the usage time and status of the lamp 1.■■ [Lamp 2]Displays the usage time and status of the lamp 2.■■ [Language]Displays the current language.■■ [Filter counter]Displays the actual usage time of the filter.■■ [Power management]Displays the current [Power management] settingstatus.■■ [Key lock]Displays the current [Key lock] setting status.■■ [PIN code lock]Displays the current [PIN code lock] setting status.■■ [Shutter management]Displays the current [Shutter management] settingstatus.■■ [Remote control]Displays the current [Remote control] settingstatus.■■ [Serial number]Displays the serial number of the projector.■■ [Option control No.]For details, refer to “Using the input module”( page 40).