[Setting] menuENGLISH - 73 Settings■■ To adjust the color1) Press ▲▼ to select the color to adjust.2) Press the button.3) Press ▲▼ to change the value, andpress ◀▶ to move between digits.■z The numerical values can also be entered usingthe number (<0> - <9>) buttons of the remotecontrol.Color x y[Red] 0.000 - 1.000 0.000 - 1.000[Green] 0.000 - 1.000 0.000 - 1.000[Blue] 0.000 - 1.000 0.000 - 1.000[White] 0.000 - 1.000 0.000 - 1.000■■ To set the display of test pattern1) Press ▲▼ to select [Auto test pattern].2) Press the button.3) Press ▲▼ to switch the setting.■z Press the button to end the editmode.[Off] Clears display of test pattern.[On] Displays the test pattern.■■ To reset a value duringadjustmentThe setting returns to its value before adjustment.The value returns to the standard value stored in[Store].1) Press ▲▼ to select [Reset].2) Press the button.■z A screen for confirming whether to reset isdisplayed.3) Select [Yes], and press the button.■■ To register adjusted content youhave changedRegisters values after adjustment.1) Press ▲▼ to select [Store].2) Press the button.3) Select [Yes], and press the button.■■ To return to the sub menuReturns the projector to the sub menu.1) Press ▲▼ to select [Back].2) Press the button.[Advanced color matching]More advanced settings than [Color matching] arepossible.1) Press ▲▼ to select [Color matching].2) Press the button.■z Displays [Color matching] setting screen.3) Press ▲▼ to select [Advanced colormatching].4) Press the button.■z Displays [Advanced color matching] settingscreen.5) Press ▲▼ to select [Advanced colormatching], and press the button.6) Press ▲▼ to select [On].■z When not performing [Advanced colormatching], select [Off]. Items other than [Testpattern] and [Back] will be grayed out andcannot be selected.
