[Screen] menu66 - ENGLISHSettings[Custom]Deletes the values registered in [Custom adj.].■z When there is no input signal, [Custom] can beselected but the image will be projected in [Normal]mode.1) Press ▲▼ to select [Custom].2) Press the button.[Custom adj.]Adjusts the horizontal and vertical scale and position.■z When there is no input signal, this item is grayedout and cannot be selected.■z If the input signal is lost during adjustment, theadjustment value is stored and the [Aspect]adjustment screen is cleared.1) Press ▲▼ to select [Custom adj.], andpress the button.■z The sub menu 2 ([Aspect] adjustment screen)is displayed.2) Press ▲▼ to select an item, and pressthe button.■z The adjustment screen is displayed.■z To adjust [H&V], press the buttonand adjust on the sub menu 2 screen.■z Press the button for [Common] and[Reset]. Select [Yes] and press the button.■z While the adjustment screen is displayed,press ▲▼ to display menus other than [H&V],[Common], and [Reset] in order.3) Press ◀▶ to adjust the setting.■z Press the button to return to the submenu.[Scale H] Adjusts the horizontal scale.[Scale V] Adjusts the vertical scale.[H&V]When adjusting the vertical andhorizontal scale, select [On] to linkthe vertical and horizontal scalesand preserve the aspect ratio of theimage.■z As you adjust the numerical valueof [Scale H], the numerical valueof [Scale V] changes accordingly.[Position H] Adjusts the horizontal shift.[Position V] Adjusts the vertical shift.[Common] Applies the adjusted content to allinputs.[Reset] Resets all the adjusted content.[Digital zoom +]This mode can only be adjusted for computer inputs.1) Press ▲▼ to select [Digital zoom +].2) Press the button.■z The menu screen is cleared and [D. zoom +] isdisplayed.3) Press the button.■z Each press of the button enlarges the image.■z Press ▲▼◀▶ to move the image.■z The image move function only works when theimage size is larger than the panel resolution *1*1: The panel resolution of the projector is 1 024 x 768 dots.Note■z When there is no input signal, [Digital zoom +] isgrayed out and cannot be selected.■z When [True] is selected, [Digital zoom +] cannot beselected.■z To end the [Digital zoom +] operation, press anybutton other than the , , and▲▼◀▶ buttons.
