|
[PC adjust] menu56 - ENGLISHSettings[PC adjust] menuSelect [PC adjust] from the main menu on themenu screen, and select the item from the submenu.For operation of the menu screen, refer to“Navigating through menu” ( page 50).■z After selecting the item, press ▲▼◀▶ to makethe setting.Control panelRemote control[Auto PC adj.]Automatically adjusts synchronization, total number ofdots, horizontal shift, and vertical shift.1) Press ▲▼ to select [Auto PC adj.].2) Press the button.■z This executes automatic adjustment.Note■z You can also use [Auto PC adj.] by pressing the button on the remote control.■z Some computers will be unable to adjust any of[Fine sync], [Total dots], [Position H], or [Position V].In this case, adjust manually and register in [Store].■z After registering the automatically adjusted settings,you can select that mode using [System] in the[Input] menu.■z The automatic PC adjustment function does notwork when any of [480p], [576p], [720p], [480i],[576i], [1035i], [1080i], or [1080p] have beenselected using [System] in the [Input] menu.■z With some computers and types of signal, it maynot be possible to project the images correctly.[Fine sync]Adjusts the projector when there is flicker due to atracking (synchronization) mismatch.1) Press ▲▼ to select [Fine sync].2) Press the button.■z The adjustment screen is displayed.3) While looking at the screen, press ◀▶to adjust the setting.■z Press the button to return to the submenu.Note■z The adjustment value can be set from 0 to 31.■z For some computers, it may not be possible tocompletely eliminate the screen flicker.[Total dots]Adjusts total number of dots in the horizontal interval.1) Press ▲▼ to select [Total dots].2) Press the button.■z The adjustment screen is displayed.3) While looking at the screen, press ◀▶to adjust the setting.■z Press the button to return to the submenu.[Position H]Adjusts the horizontal position of the screen.1) Press ▲▼ to select [Position H].2) Press the button.■z The adjustment screen is displayed.3) While looking at the screen, press ◀▶to adjust the setting.■z Press the button to return to the submenu. PreviousNext |