Panasonic PT-RZ370E Operating Instructions Manual

Contents

Chapter 1 Preparation — Start-up displayENGLISH - 17Start-up displayThe initial setting screen is displayed when the projector is switched on for the first time after purchase as well as when [ALL USER DATA](x page 80) in [INITIALIZE] is executed. Set them in accordance with circumstances.In other occasions, you can change the settings by menu operations.Notef When the projector is used for the first time, you may be required to adjust the lens zoom ring and focus ring of the projector (x page 19)to display the menu screen clearly.Refer to “Adjusting the image” (x page 34) for details.Initial setting (display language)Select the language to show on the screen. (x page 57)1) Press as to select the display language.(17(5,1,7,$/6(77,1*6(/(&76(72) Press the button to proceed to the initial setting.Initial setting (projector setup)Set each item.1) Press as to select an item.2) Press qw to switch the setting.(17(5,1,7,$/6(77,1*0(186(/(&7 &+$1*(6(7352-(&7,210(7+2'&22/,1*&21',7,216&5((1)250$76&5((1326,7,21)5217)/225)/2256(77,1*f Refer to the following page for details of each item.[PROJECTION METHOD] (x page 68)[COOLING CONDITION] (x page 69)[SCREEN FORMAT] (x page 59)[SCREEN POSITION] (x page 59)3) Press the button.f Fix the setting value to complete the initial setting.Notef If you press the button in the initial setting (display language) screen, you can go back to the initial setting (display language)screen.f [SCREEN FORMAT] and [SCREEN POSITION] can only be set on PT-RW330E.f To continue operations after completed the initial setting (projector setup), refer to “Selecting the input signal” (x page 34).f By default, the time zone of the projector is set to +09:00 (Japan and Korean Standard Time). Change the setting in the [PROJECTORSETUP] menu → [DATE AND TIME] → [TIME ZONE] to the time zone of the region where you use the projector.