Chapter 4 Settings — [PROJECTOR SETUP] menu76 - ENGLISHNotef Refer to “ terminal” (x page 117).f When [DIGITAL LINK] is selected, communication is only available using the serial terminal when the relevant device (such as an optionaldigital interface box (Model No.: ET-YFB100G)) is connected to the terminal.f When transferring logos via the optional digital interface box (Model No.: ET-YFB100G), “NO SIGNAL SLEEP” of ET-YFB100G must be setto “OFF” to avoid cutting off communication.f When [DIGITAL LINK] is selected, communication speed is fixed to 9 600 bps.[FUNCTION BUTTON]Displays the functions that are currently assigned to the - buttons on the remote control. Also, cancel the assignedsettings.Canceling the assigned settings of the - buttons1) Press as to select [FUNCTION BUTTON].2) Press the button.f The [FUNCTION BUTTON] screen is displayed.3) Press as to select the function button (F1 - F3) where to cancel the assignment.4) Press the button on the remote control.5) When the confirmation is displayed, select [OK] and press the button.Notef You can also cancel the assigned settings by displaying the on-screen menu, selecting the menu item to be canceled (main menu, sub-menu, or details menu), and then pressing any one of the corresponding - buttons for at least three seconds.[AUDIO SETTING]Sets advanced audio functions.Adjusting the volume1) Press as to select [AUDIO SETTING].2) Press the button.f The [AUDIO SETTING] screen is displayed.3) Press as to select [VOLUME].4) Press qw to adjust the level.Operation Adjustment RangePress the w button. The volume increases. Maximum value 63Press the q button. The volume decreases. Minimum value 0Adjusting the left/right audio balance1) Press as to select [AUDIO SETTING].2) Press the button.f The [AUDIO SETTING] screen is displayed.3) Press as to select [BALANCE].4) Press qw to adjust the level.Operation Adjustment RangePress the w button. The right volume increases. L16 - R16Press the q button. The left volume increases.
