Chapter 4 Settings — [SECURITY] menuENGLISH - 85[TEXT DISPLAY]Overlap the security message (text) over the projecting image.1) Press as to select [TEXT DISPLAY].2) Press qw to switch [TEXT DISPLAY].f The items will switch each time you press the button.[OFF] Hides the security message.[ON] Displays the security message.Notef If a closed caption signal of the selected mode is input, the security message is not displayed.[TEXT CHANGE]Change the text displayed when [TEXT DISPLAY] is set to [ON].1) Press as to select [TEXT CHANGE].2) Press the button.f The [TEXT CHANGE] screen is displayed.3) Press asqw to select the text, and press the button to enter the text.f Maximum 22 characters can be input.4) Press asqw to select [OK], and press the button.f The text is changed.[MENU LOCK]Display the menu with the 1) Press as to select [MENU LOCK].2) Press qw to switch [MENU LOCK].f The items will switch each time you press the button.[OFF] Cancels the lock on menu operations.[ON] Locks menu operations.Notef After setting [MENU LOCK] to [ON], if the wrong password is input, the f At the time of purchase or after [ALL USER DATA] initialization, [MENU LOCK] is set to [OFF].f The lock release is maintained until the projector enters standby.[MENU LOCK PASSWORD]Change the menu lock password.1) Press as to select [MENU LOCK PASSWORD].2) Press the button.f The [MENU LOCK PASSWORD] screen is displayed.3) Press asqw to select the text, and press the button to enter the text.f Maximum 16 characters can be input.4) Press asqw to select [OK], and press the button.f To cancel, select [CANCEL].Attentionf The initial password when used for the first time or after initializing all the user data is “AAAA”.f Change the password periodically that is hard to guess.