Panasonic PT-RZ370E Operating Instructions Manual

Contents

Chapter 4 Settings — [DISPLAY OPTION] menu58 - ENGLISH[DISPLAY OPTION] menuOn the menu screen, select [DISPLAY OPTION] from the main menu, and select the item fromthe sub-menu.Refer to “Navigating through the menu” (x page 40) for the operation of the menu screen.f After selecting the item, press asqw to set.[COLOR MATCHING]You can correct the color difference between the sets when multiple sets are to be used simultaneously.Adjusting the color matching as desired1) Press as to select [COLOR MATCHING].2) Press qw to switch [COLOR MATCHING].f The items will switch each time you press the button.[OFF] Color matching adjustment is not carried out.[3COLORS] The three colors [RED], [GREEN], or [BLUE] can be adjusted.[7COLORS] The seven colors [RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], or [WHITE] can beadjusted.[MEASURED] Refer to “Adjusting the color matching using a colorimeter” (x page 59) for details about this mode.3) Select [3COLORS] or [7COLORS], and press the button.f The [3COLORS] or [7COLORS] screen is displayed.4) Press as to select [RED], [GREEN], [BLUE], or [WHITE] ([RED], [GREEN], [BLUE], [CYAN],[MAGENTA], [YELLOW], or [WHITE] for [7COLORS]).5) Press the button.f The [3COLORS:RED], [3COLORS:GREEN], [3COLORS:BLUE], or [3COLORS:WHITE] screen is displayed.For [7COLORS], the [7COLORS:RED], [7COLORS:GREEN], [7COLORS:BLUE], [7COLORS:CYAN], [7COLORS:MAGENTA],[7COLORS:YELLOW], or [7COLORS:WHITE] screen is displayed.6) Press as to select [RED], [GREEN], or [BLUE].f If [WHITE] is selected from [3COLORS], only [GAIN] can be adjusted.7) Press qw to adjust.f Adjustment value will change between 0 and 2 048 *1 .*1 Depends on the signal input.Notef Operation when correcting the adjustment colorWhen the correction color same as the adjustment color is changed: The luminance of the adjustment color changes.When correction color red is changed: Red is added to or subtracted from the adjustment color.When correction color green is changed: Green is added to or subtracted from the adjustment color.When correction color blue is changed: Blue is added to or subtracted from the adjustment color.f This adjustment should be carried out by a person who is familiar with the projector or by a service person because a high level of skill isrequired to make a successful adjustment.f Pressing the button will restore the factory default settings for all items.f If [COLOR MATCHING] is set to other than [OFF], [COLOR TEMPERATURE] is fixed to [USER]. (However, [WHITE BALANCE HIGH]cannot be adjusted.)f When [PICTURE MODE] (x page 45) is set to [DYNAMIC], [COLOR MATCHING] cannot be adjusted.