Chapter 4 Settings — [NETWORK] menu92 - ENGLISHAccessing from the web browser1) Start up the web browser on the computer.2) Enter the IP address set on the projector into the URL entry field of the web browser.3) Enter the user name and the password.f The factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the password is panasonic (lowercase).4) Click OK.f The [Projector status] page is displayed.Notef If you use a web browser to control the projector, set [WEB CONTROL] to [ON] in [NETWORK CONTROL] (x page 89).f Do not perform setting or control simultaneously by starting up multiple web browsers. Do not set or control the projector from multiplecomputers.f Change the password first. (x page 102)f The administrator rights allows to use all functions. The user rights allow use of [Projector status] (x page 93), confirmation of the errorinformation page (x page 94), [Network status] (x page 94), [Basic control] (x page 95), [Advanced control] (x page 96), and[Change password] (x page 102), only.f Access will be locked for a few minutes when an incorrect password is entered three times consecutively.f Some items on the projector setting page use the Javascript function of the web browser. The projector may not be able to be controlledproperly if it is set with a browser that does not have this function enabled.f While updating the screen for the web control, the screen may become white for a moment, but it is not a malfunction.