Chapter 2 Getting Started — Setting upENGLISH - 23Setting upProjection methodYou can use the projector with any of the following four projection methods. Select the appropriate method depending on the environment.Mounting on the ceiling and projecting forward Setting on a desk/floor and projecting from rear(Using the translucent screen)Menu item*1 Method Menu item *1 Method[PROJECTION METHOD] [FRONT/CEILING] [PROJECTION METHOD] [REAR/FLOOR][COOLING CONDITION] [CEILING SETTING] [COOLING CONDITION] [FLOOR SETTING]Mounting on the ceiling and projecting from rear(Using the translucent screen)Setting on a desk/floor and projecting forwardMenu item*1 Method Menu item *1 Method[PROJECTION METHOD] [REAR/CEILING] [PROJECTION METHOD] [FRONT/FLOOR][COOLING CONDITION] [CEILING SETTING] [COOLING CONDITION] [FLOOR SETTING]*1 For menu item details, refer to the [PROJECTOR SETUP] menu → [PROJECTION METHOD] (x page 68) and [COOLING CONDITION](x page 69).Parts for ceiling mount (optional)You can install the projector on the ceiling using the optional ceiling mount bracket (Model No.: ET-PKR100H (for high ceilings), orET-PKR100S (for low ceilings).f Use only the ceiling mount brackets specified for this projector.f Refer to the installation manual for the ceiling mount bracket when installing and setting up the bracket and the projector.Attentionf To ensure projector performance and security, installation of the ceiling mount bracket must be carried out by your dealer or a qualifiedtechnician.
