Chapter 4 Settings — [POSITION] menuENGLISH - 51[ASPECT]You can switch the aspect ratio of the image.The aspect ratio is switched within the screen range selected in [SCREEN SETTING]. Set [SCREEN SETTING] first. (x page 59)[SCREEN SETTING] is available only on PT-RW330E.1) Press as to select [ASPECT].2) Press qw or the button.f The [ASPECT] individual adjustment screen is displayed.3) Press qw to switch [ASPECT].f The items will switch each time you press the button.[NORMAL] Display images without changing the aspect ratio of the input signals.[NATIVE] Display images without changing the resolution of the input signals.[WIDE] Display images with the aspect ratio converted to 16:9 when standard signals are input*1 . Displayimages without changing the aspect ratio when wide-screen signals are input *2 .[4:3]Display images without changing the aspect ratio when standard signals are input *1 . Display imageswithout changing the aspect ratio so that the images will fit in the 4:3 screen when wide-screensignals are input *2 .[H FIT]Display images using the entire width of the screen. When signals have the aspect ratio verticallylonger than the aspect ratio of the screen selected in [SCREEN FORMAT]*3 , the images are displayedwith the top and bottom parts cut off.[V FIT]Display images using the entire height of the screen range selected in [SCREEN FORMAT]*3 . Whensignals have the aspect ratio horizontally longer than the aspect ratio of the screen selected in[SCREEN FORMAT]*3 , the images are displayed with the right and left parts cut off.[FULL]Display images in the entire screen range selected in [SCREEN FORMAT]*3 . When the aspect ratio ofthe input signals differs from that of the screen range, the images are displayed with the aspect ratioconverted to that of the screen selected in [SCREEN FORMAT]*3 .*1 Standard signals are input signals with an aspect ratio of 4:3 or 5:4.*2 Wide-screen signals are input signals with an aspect ratio of 16:10, 16:9, 15:9 or 15:10.*3 For PT-RZ370E, the [SCREEN FORMAT] setting is not available. The screen aspect ratio of PT-RZ370E is 16:9.Notef If an aspect ratio different from the aspect ratio for the input signals is selected, the images will appear to be different from the originals. Becareful of this when selecting the aspect ratio.f If using the projector in places such as cafes or hotels to display programs for a commercial purpose or for public presentation, note thatadjusting the aspect ratio or using the zoom function to change the screen images may be an infringement of the rights of the originalcopyright owner for that program under copyright protection laws. Take care when using a function of the projector such as the aspect ratioadjustment and zoom function.f If conventional (normal) 4:3 images which are not wide-screen images are displayed on a wide screen, the edges of the images may notbe visible or they may become distorted. Such images should be viewed as with an aspect ratio of 4:3 in the original format intended by thecreator of the images.[ZOOM]You can adjust the size of the screen size.When [ASPECT] is set to other than [NORMAL] and [NATIVE]1) Press as to select [ZOOM].2) Press the button.f The [ZOOM] screen is displayed.3) Press as to select [INTERLOCKED].4) Press qw to switch [INTERLOCKED].[OFF] Set the [VERTICAL] and [HORIZONTAL] zoom ratio.[ON] Use [BOTH] to set zoom ratio. Horizontal and vertical can be expanded by units of 1.0 time.5) Press as to select [VERTICAL] or [HORIZONTAL].f If [ON] is selected, select [BOTH].6) Press qw to adjust.