Chapter 4 Settings — [PROJECTOR SETUP] menu74 - ENGLISH[DIGITAL LINK INPUT]Can only be selected when [STARTUP INPUT SELECT] is set to [DIGITAL LINK].1) Press as to select [DIGITAL LINK INPUT].2) Press qw to switch [DIGITAL LINK INPUT].f The items will switch each time you press the button.[CURRENT] Switches to DIGITAL LINK input.[INPUT1]Switches to DIGITAL LINK input, and that input switches to specified input when the Panasonictwisted-pair-cable transmitter is connected.[INPUT2][INPUT3][INPUT4][INPUT5][INPUT6][INPUT7][INPUT8][INPUT9][INPUT10]Notef When the Panasonic twisted-pair-cable transmitter (such as optional digital interface box (Model No.: ET-YFB100G)) is connected to theprojector, its input name is reflected to [INPUT1] to [INPUT10] automatically. If an item where the input name is not reflected is selected, it isdisabled.[RS-232C]Set the sending and receiving port of the serial command.Communicating using the terminal1) Press as to select [RS-232C].2) Press the button.f The [RS-232C] screen is displayed.3) Press as to select [INPUT SELECT].4) Press qw to switch [SERIAL].5) Press as to select [BAUDRATE].6) Press qw to switch [BAUDRATE].f The items will switch each time you press the button.[9600]Select the proper speed.[19200][38400]7) Press as to select [PARITY].8) Press qw to switch [PARITY].f The items will switch each time you press the button.[NONE]Select the parity condition.[EVEN][ODD]