|
Chapter 4 Settings — [SECURITY] menu84 - ENGLISH[SECURITY] menuOn the menu screen, select [SECURITY] from the main menu, and select the item from thesub-menu.Refer to “Navigating through the menu” (x page 40) for the operation of the menu screen.f When the projector is used for the first timeInitial password: Press awsqawsq in order, and press the button.f After selecting the item, press asqw to set.Attentionf When you select the [SECURITY] from the main menu and press the button, entering a password is required. Enter the setpassword and then continue operations of the [SECURITY] menu.f When the password has been changed previously, enter the changed password, and press the button.Notef The entered password is displayed with * mark on the screen.f An error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.[SECURITY PASSWORD]The [SECURITY PASSWORD] screen is displayed when the power is turned on. If an incorrect password has been entered, operations otherthan the power <v/b> button or the button are not available.1) Press as to select [SECURITY PASSWORD].2) Press qw to switch [SECURITY PASSWORD].f The items will switch each time you press the button.[OFF] Disables the security password entry.[ON] Enables the security password entry.Notef The [SECURITY PASSWORD] setting is set to [OFF] at the time of purchase or when all the user data has been initialized.f Change the password periodically that is hard to guess.f The security password is enabled after setting [SECURITY PASSWORD] to [ON] and turning the switch to .[SECURITY PASSWORD CHANGE]Change the security password.1) Press as to select [SECURITY PASSWORD CHANGE].2) Press the button.f The [SECURITY PASSWORD CHANGE] screen is displayed.3) Press asqw and the number (<1> - <6>) buttons to set the password.f Up to eight button operations can be set.4) Press the button.5) Re-enter the password for the confirmation.6) Press the button.Notef The entered password is displayed with * mark on the screen.f If numbers have been used for the security password, the security password will need to be initialized again if the remote control is lost.Consult your dealer for the initialization method. PreviousNext |