Chapter 4 Settings — [DISPLAY OPTION] menuENGLISH - 654) Press qw to switch [MODE].f The items will switch each time you press the button.[CC1] Displays CC1 data.[CC2] Displays CC2 data.[CC3] Displays CC3 data.[CC4] Displays CC4 data.Notef Closed captions are a function that is mainly used in North America to display text information with video signals. Captions may not bedisplayed depending on the connected devices or software being played back.f [CLOSED CAPTION SETTING] can only be selected if an NTSC signal is input.f If a closed caption signal of the selected mode is input, the security message and the ECO level (x page 71) are not displayed evenwhen the [SECURITY] menu → [TEXT DISPLAY] (x page 85) is set to [ON].f Closed captions are not displayed when the menu screen is displayed.[BACK COLOR]Set the display of the projection screen when there is no signal input.1) Press as to select [BACK COLOR].2) Press qw to switch [BACK COLOR].f The items will switch each time you press the button.[BLUE] The entire projection area appears blue.[BLACK] The entire projection area appears black.[DEFAULT LOGO] The Panasonic logo is projected.[USER LOGO] The image registered by the user is projected.Notef To create and register the image for [USER LOGO], “Logo Transfer Software” included in the supplied CD-ROM is required.[STARTUP LOGO]Set the logo display when the power is turned on.1) Press as to select [STARTUP LOGO].2) Press qw to switch [STARTUP LOGO].f The items will switch each time you press the button.[DEFAULT LOGO] The Panasonic logo is projected.[USER LOGO] The image registered by the user is projected.[NONE] No startup logo is projected.Notef The startup logo will disappear in approximately 15 seconds.f To create and register the image for [USER LOGO], “Logo Transfer Software” included in the supplied CD-ROM is required.