5 – Non-Interactive Mode CommandsNon-interactive Commands5-26 SN0054621-00 ES-pxTo unbind all persistent targets on the HBA, enter the -px command as follows:-px -r(Update ROM Image)For information on ROM image file names, refer to Appendix E Downloadable FileNames.Be sure to select Save changes and reset HBA afterwards; otherwise, thechange will not take effect.Type the following command to update the specified HBA’s ROM:-r <File Name>The <hba_port_inst> parameter is the HBA instance to update. The <File Name>parameter indicates the file containing the ROM image to upload.For information on the interactive version of this command, see “Update ROMImage (CLI Option -r)” on page 4-14.-rdfEnter the -rdf command to restore the specified HBA port’s firmware values tothe factory default values:-rdf Issuing this command resets the HBA.There is no interactive command for this function.CAUTION! Before attempting to update the ROM image contact QLogic CustomerSupport. Before updating the ROM image, ensure that no I/O processes arerunning. An administrator must take necessary actions to ensure changes will befully recognized by the operating system (reboot, flush cache, sync disk,and so forth). A ROM update and reset will be performed that requires that allapplications accessing impacted LUNs must be shut down. Any impacted systems must be unmounted.
