5 – Non-Interactive Mode CommandsNon-interactive Commands5-10 SN0054621-00 ES-dtdupd(Duplicate a Persistent Target)To duplicate a discovered target that is persistent, enter the -dtdupd commandas follows:-dtdupd <hba_port_inst> <target_id>A duplicate target is assigned a new iSCSI initiator ID (ISID) and can then be usedto create a redundant path.For information on the interactive version of this command, “Duplicate a PersistentTarget” on page 4-46.-dtli(Login and Persist a Discovered Target)To log in a specific discovered target, enter the -dtli command as follows:-dtli <hba_port_inst> <target_instance>To obtain the target instance, use the command “-dtdsp (Display DiscoveredTargets)” on page 5-9.For information on the interactive version of this command, “Login and Persist aDiscovered Target” on page 4-46.-dtlia(Login and Persist a Discovered Target)To log in all discovered targets, enter the -dtlia command as follows:-dtlia <hba_port_inst>For information on the interactive version of this command, “Login and Persist aDiscovered Target” on page 4-46.-dtrem(Remove Discovered Target)To remove a non-persistent discovered target, enter the -dtrem command asfollows:-dtrem <hba_port_inst> <target_instance>To obtain the target instance, use the command “-dtdsp (Display DiscoveredTargets)” on page 5-9.For information on the interactive version of this command, “Remove DiscoveredTarget” on page 4-46.
