4 – Interactive Mode CommandsPort Level Info & Operations MenuSN0054621-00 E 4-21ALink Local Address : fe80::2c0:ddff:fe08:5a13IPv6 Local Address State : Valid (0x5)IPv6 Address 0 : Source Address Not ValidIPv6 Address 1 : Source Address Not ValidIPv6 Default Router : Router Address Not ValidIPv6 Port Number : 3260IPv6 Router Adv Link MTU : 0 bytesiSNS : Disabled.Configure IP Settings(CLI Option -ipdhcp)Select the Configure IP Settings menu to enable or disable the followingfeatures: Enable IPv4 DHCP to obtain IPv4 Network Information Enable IPv6 Obtain Link Local Auto Obtain Routable Address Auto Obtain Router Address Auto IPv6 Default Router IP AddressYou are prompted to turn on or off each feature; the current state is shown at theend of the prompt. For example, the following prompt indicates that the routeraddress is not obtained automatically:Obtain Router Addr Auto [off] :To change this setting, type on, and then press ENTER (be sure to turn off theCAPS LOCK key; entries are case sensitive). If you do not want to change thissetting, press ENTER.iSNS Settings(CLI Option -isns)By default, iSNS is disabled. Use iSNS when extended discovery managementcapabilities (for example, notifications, access management, and configuration)are required, such as in larger storage networks.To enable iSNS, type on at the Use iSNS: [off] prompt, and then pressENTER. You are prompted to enter an iSNS IP address.
