4 – Interactive Mode CommandsSN0054621-00 E 4-5A5. Port Diagnostic Menu (see page 4-29)1. Ping Target (see page 4-30)2. Perform Loopback Test (see page 4-31)3. Perform Read/Write Buffer Test (see page 4-31)4. Display Port Statistics (see page 4-32)5. Reset Statistics (see page 4-32)6. Display ARP Table (see page 4-32)7. Display Connection Error Log (see page 4-32)8. Export Connection Error Log (see page 4-33)9. Display Neighbor Cache (IPv6) (see page 4-33)10. Display Destination Cache (IPv6) (see page 4-33)11. Display Default Router List (IPv6) (see page 4-33)12. Display Local Prefix List (IPv6) (see page 4-33)13. Select HBA Port (see page 4-49)14. Refresh (see page 4-49)15. Exit (see page 4-50)6. BIOS/UEFI [or FCode] Settings Menu (see page 4-34)1. Display BIOS/UEFI [or FCode] Information (see page 4-35)2. Set BIOS/UEFI Mode (see page 4-35)3. Set Primary Boot Target Information (see page 4-35)4. Set Secondary Boot Target Information (see page 4-35)5. Clear Primary Boot Target Information (see page 4-36)6. Clear Secondary Boot Target Information (see page 4-36)7. Set Alternative Client ID (see page 4-36)8. Save Changes and Reset HBA (see page 4-18)9. Select HBA Port (see page 4-49)10. Refresh (see page 4-49)11. Exit (see page 4-50)Table 4-1. Command Line Interface Menu (Continued)Level 1 Level 2 Level 3 Level 4
