4 – Interactive Mode CommandsPort Level Info & Operations MenuSN0054621-00 E 4-45ASelect the Target Discovery Menu option to view the HBA Target DiscoveryMenu containing the following options:1. Display Send Targets (see page 4-45)2. Display Discovered Targets (see page 4-45)3. Add a Send Target (see page 4-45)4. Mark Send Target for re-discovery (see page 4-45)5. Remove a Send Target (see page 4-46)6. Login and persist a discovered target (see page 4-46)7. Duplicate a Persistent Target (see page 4-46)8. Duplicate a Discovered Target (see page 4-46)9. Remove Discovered Target (see page 4-46)10. Display iSNS Settings (see page 4-46)11. Configure iSNS (see page 4-46)12. Save changes and reset HBA (if necessary) (see page 4-18)13. Select HBA Port (see page 4-49)14. Refresh (see page 4-49)15. Exit (see page 4-50)Display Send TargetsSelect the Display Send Targets option to view a list of send targets in theSANsurfer iSCSI HBA CLI database, as well as the persistent send targets in theHBA database.Display Discovered TargetsSelect the Display Discovered Targets option to view a list of discovered targetsin the SANsurfer iSCSI HBA CLI database.Add a Send TargetSelect the Add a Send Target option to add a new send target to either theSANsurfer iSCSI HBA CLI database or the HBA database. You must save yourchanges before send targets are discovered. When you are prompted to make thetarget persistent, respond yes to add the target to the HBA database and log inthe targets. For the added target to be discovered, you must use the SaveTarget/CHAP Settings option (see page 4-47).Mark Send Target for Re-discoverySelect the Mark Send Target for Re-discovery option to have SANsurfer iSCSIHBA CLI discover send targets when you select the Save Target/CHAP Settingsoption (see page 4-47).
