A – Port- and HBA-level ParametersHBA-level ParametersA-10 SN0054621-00 ESHBA-level ParametersTable A-2 lists the HBA parameters and their values. To view all HBA parameters,both configurable and non-configurable (read-only), use the -ch option innon-interactive mode. To edit configurable parameters, use the -nh option innon-interactive mode.NOTE:The parameters in this table are sorted alphabetically for ease of use.Table A-2. HBA SettingsParameter Value Alias DescriptionHBA_Alias Character string HBAALIAS HBA alias name. Symbolic nameyou assign to the HBA for identifi-cation purposes.HBA_Default_Fragment_Reass_Timeout40 to 600 (units are1/10 secs)HBADFRT For QLE406x HBAs only. Defaultvalue for the IP Fragment Reas-sembly Timeout.HBA_Delayed_ACK on or off HBADELACK For QLE406x HBAs only. Deter-mines what occurs when the HBAreceives a Data-In PDU with thefinal bit set and no status reported.When on, the HBA immediatelysends a TCP acknowledgment(this is the default value). Whenthis parameter is off, the HBAdelays the acknowledgment andwaits for more data.HBA_Reserved_TCP_Config(Request assistancefrom QLogic Support)HBARTCPC For QLE406x HBAs only. Aparameter with control bits for vari-ous TCP algorithms in the firm-ware. Do not modify withoutinstruction of valid configurationvalues provided by QLogic.HBA_TCP_MAX_Window_Size4096 to 65535 HBATCPMWS The maximum TCP Receive Win-dow size in bytes.
