5 – Non-Interactive Mode CommandsNon-interactive Commands5-14 SN0054621-00 ES-i(List All QLogic iSCSI HBA Ports Detected)Use the -i command to view a list of all detected HBA port instances (“ports”) inthe system. Each port instance (hba_port_inst) is identified by its number.To view general HBA information, enter the -i command as follows:-i [hba_port_inst]When you use hba_port_inst, information for only that HBA port instance isshown. When you do not use hba_port_inst, information for all ports in thesystem is shown.The following HBA (port) information is shown: Item number (order in which ports were detected) HBA number, that is, the number of this HBA in the detection process HBA port number (0 or 1) for this HBA Port instance number in the system (two-port HBAs appear twice) Port Instance on the HBA HBA model number (for example, QLA4010) HBA serial number (for example, TFC0105C51704) Firmware version (for example, 3.0.1.45) Connection medium IP address (IP address of the HBA port instance) iSCSI name (HBA port iSCSI name; the QLogic default name or one youassign) Alias (HBA port instance iSCSI alias name that you assign)Figure 5-1 shows how to read the display.Figure 5-1 HBA Port InformationItem 0HBA 0 (First HBAdetected in system)Port 0 on this HBA HBA Model Number0. HBA: 0 Port: 0 HBA Port Instance: 0 HBA Model: QLA4050CHBA Port Instance 0(First detected in system)
