4 – Interactive Mode CommandsSN0054621-00 E 4-7A10. Target Discovery Menu (see page 4-44)1. Display Send Targets (see page 4-45)2. Display Discovered Targets (see page 4-45)3. Add a Send Target (see page 4-45)4. Mark Send Target for Re-discovery (see page 4-45)5. Remove a Send Target (see page 4-46)6. Login and persist a discovered target (see page 4-46)7. Duplicate a Persistent Target (see page 4-46)8. Duplicate a Discovered Target (see page 4-46)9. Remove Discovered Target (see page 4-46)10. Display iSNS Settings (see page 4-46)11. Configure iSNS (see page 4-46)12. Save changes and reset HBA (see page 4-18)13. Select HBA Port (see page 4-50)14. Refresh (see page 4-50)15. Exit (see page 4-50)11. List LUN Information (see page 4-47)12. Save Target/CHAP Changes (see page 4-47)13. Select HBA Port (see page 4-49)14. Refresh (see page 4-49)15. Exit (see page 4-50)8. Select HBA Port (see page 4-49)9. Refresh (see page 4-49)10. Exit (see page 4-50)5. List All QLogic iSCSI HBA Ports Detected (see page 4-48)6. Help (see page 4-49)7. Select HBA Port (see page 4-49)8. Refresh (see page 4-49)9. Exit (see page 4-50)Table 4-1. Command Line Interface Menu (Continued)Level 1 Level 2 Level 3 Level 4
