4 – Interactive Mode CommandsHBA Level Info & Operations Menu (CLI Option -i)4-14 SN0054621-00 ESUpdate ROM Image(CLI Option -r)Select the Update ROM Image option to update the ROM image. At the prompt,type the name of the file containing the ROM image to upload to the HBA.For information on ROM Image file names, see Appendix E Downloadable FileNames.HBA Reset(CLI Option -b)Select the HBA Reset option to reset the HBA after making configurationchanges.CAUTION! Before updating the firmware image, be sure that no I/O processes arerunning. An administrator must take necessary actions to ensure changes will befully recognized by the operating system (reboot, flush cache, sync disk,and so forth.) A firmware update and reset will be performed that requires allapplications accessing impacted LUNs to be shut down. Any impacted systems must be unmounted. Following firmware update, be sure to select Save changes and resetHBA; otherwise, the change will not take effect.CAUTION! Before attempting to update the ROM image, contact QLogic CustomerSupport (support@qlogic.com). Before updating the ROM image, ensure that no I/O processes arerunning. An administrator must take necessary actions to ensure changes will befully recognized by the operating system (reboot, flush cache, sync disk,and so forth). A ROM update and reset will be performed that requires all applicationsaccessing impacted LUNs to be shut down. Any impacted systems must be unmounted. To ensure your changes take effect, be sure to select Save changesand reset HBA.
