4 – Interactive Mode CommandsPort Level Info & Operations Menu4-26 SN0054621-00 ESConfigure Basic SettingsSelect the Configure Basic Settings option to modify the following settings(listed here in alphabetic order): ENABLE_4022IPv4 ENABLE_IPv4 ENABLE_IPv6 IP_Address IP_Gateway IP_Subnet_Mask IPv6_Addr_Local_Link iSCSI_Alias iSCSI_Discovery_Logout iSCSI_Strict_Login LDROUTER_AUTO LOC_LINK_AUTO ROUTABLE_AUTO Task_Management_Timeout TCP_DHCP TCP_NagleEach setting is displayed with the current value in brackets, for example:Task_Management_Timeout [10] :To change the value, type the new value after the prompt. To keep the currentvalue, press ENTER at the prompt. SANsurfer iSCSI HBA CLI displays the nextdevice setting. The settings are displayed one by one (but not alphabetically, as inthe preceding bullet list).Table A-1 on page A-1 describes these settings.Configure Advanced SettingsSelect the Configure Advanced Settings option to modify the following settings(listed here in alphabetic order): AFW_AutoConnect AFW_Delayed_Ack AFW_Device_Timeout AFW_Serlz_Task_Mngmt ExeThrottle FirstBurstLen Force_Negotiate_Main_iSCSI_Keys FW_ZIO_Enable_Mode IP_ARP_Redirect IPv4_TOS_Enable IPv4TOS IPv4TTL