4 – Interactive Mode Commands4-4 SN0054621-00 ES2. Port Network Settings Menu (see page 4-20)1. Display Network Settings (see page 4-20)2. Configure IP Settings (see page 4-21)3. iSNS Settings (see page 4-21)4. Select HBA Port (see page 4-49)5. Save Changes and Reset HBA (see page 4-18)6. Refresh (see page 4-49)7. Exit (see page 4-50)3. Edit Configured Port Settings Menu (see page 4-22)1. Display Configured Port Settings (see page 4-22)2. Change Port iSCSI Alias Name (see page 4-22)3. Port Firmware Settings Menu (see page 4-23)1. Display Configured Port Settings (see page 4-23)2. Edit a Specific Port Setting (see page 4-24)3. Configure iSCSI Settings (see page 4-24)4. Configure Firmware Settings (see page 4-25)5. Configure Device Settings (see page 4-25)6. Configure Basic Settings (see page 4-26)7. Configure Advanced Settings (see page 4-26)8. Configure IPv6 Settings (see page 4-27)9. Configure IPv6 TCP Settings (see page 4-28)10. Save Changes and Reset HBA (see page 4-18)11. Select HBA Port (see page 4-49)12. Refresh (see page 4-49)13. Exit (see page 4-50)4. Legacy QLA4010 Restore Default Port Settings (see page 4-28)5. Select HBA Port (see page 4-49)6. Save Changes and Reset HBA (if necessary) (see page 4-18)7. Refresh (see page 4-49)8. Exit (see page 4-50)4. Port Restore Factory Defaults (see page 4-28)Table 4-1. Command Line Interface Menu (Continued)Level 1 Level 2 Level 3 Level 4
